Click the link below to view a video demonstration of this machine
          https://youtu.be/taOdwZMJIGc
          
          "To the best of our knowledge all details listed below are deemed correct. It
          
          is the buyer's responsibility to confirm all details and we encourage an
          
          inspection of the machine(s) and accessories prior to purchase."
          
          Equipped With:
            Haas Control 
            10 Position ATC
            Floppy 
           =4Th Axis Ready
          
          
          General Specifications As Per Brochure (To Be Verified By Buyer):
            X Axis:                                  30" 
            Y Axis:                                  12" 
            Z Axis:                                  16" 
            Spindle Nose to Table (~ max):           20" 
            Spindle Nose to Table (~ min):           4" 
              
            Length:                                  47.75 " 
            Width:                                   10.5 " 
            T-Slot Width:                            5/8 " 
            T-Slot Center Distance:                  4.00 " 
            Number of Std T-Slots:                   3 
            Max Weight on Table (evenly distributed) 1000 lb 
              
            Max Rating:                              7.5 hp 
            Max Speed:                               4000 rpm 
            Max Torque:                              33 ft-lb @ 1200 rpm 
            Drive System:                            Direct Speed Belt Drive 
            Taper:                                   CT 40 
            Bearing Lubrication:                     Grease packed 
            Cooling:                                 Air Cooled 
              
            Rapids on X:                             400 in/min 
            Rapids on Y:                             400 in/min 
            Rapids on Z:                             400 in/min 
            Max Cutting:                             400 in/min 
            Max Tool Diameter:                       (full)    3.5 " 
            Max Tool Weight:                         12 lb 
            Tool-to-Tool (avg):                      5.7 sec 
            Chip-to-Chip (avg):                      6.5 sec 
          
          Machine:  88" x 59" x 99" 4,000 lbs
          Coolant Tank:  24" x 12" x 15" 35 lbs
          
          Motion Hours 12775
          Spindle Hours 12751
          
          
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): mike@automatics.com
Web: www.automatics.com